Assembly And Debugging Skills Of Non-standard Automated Rodless Cylinders
Publish Time: Author: Site Editor Visit: 13
rodless cylinder pneumatic Rotating part, the balance, verticality and concentricity of the rotating part should be ensured to achieve the accuracy of swing arm and indexing.
cylinder rodless pins and slots The pin holes and slots should be wiped clean, and the appropriate long stroke rodless cylinder pins (pin material hardness is above 58 degrees) should be selected for positioning. The pins are best matched on one side for easy disassembly and assembly; the slot accuracy should be controlled within 0.02 to ensure the accuracy during secondary assembly low profile rodless air cylinder, and the interior needs to be polished to prevent scratches and scratches on the product.
Most of the material channels of the feeding part are based on pneumatic rodless actuators, with a tolerance band of about 0.1, which can ensure that the product passes through the channel unimpeded. The feeding direction and joints of the material channel parts need to be chamfered with a standard of 0.2*30 degrees, and the specific situation depends on the product.
When assembling the lead screw and the slide rail, special attention should be paid to the nut and the slide rail. They should not slide out of the lead screw and the slide rail to avoid the ball falling out and causing the product to be scrapped or affecting the accuracy. When assembling rodless, ensure the parallelism, verticality and concentricity of the parts before assembling rodless actuators to prevent unqualified parts from fixing and deforming the lead screw and the slide rail during assembly, causing scrap.
