Rodless Cylinder Arrangement In Automobile Engines
Publish Time: Author: Site Editor Visit: 51
Both the V-shaped engine and the horizontally opposed engine can be seen as the evolution of the inline engine. Divide the original rodless air cylinder price into two groups and reassemble them at a certain angle of about 90° to form a V-shaped engine; expand the angle to 180° to form a horizontally opposed engine.
The height and length of the V-shaped engine are relatively smaller than those of the inline engine, making it easier to arrange it on the car. In particular, modern cars pay more attention to aerodynamics, requiring the car's frontal area to be as small as possible, that is, requiring the engine hood to be as low as possible. In addition, if the length of the engine is shortened, more space can be left for the driver's cabin, thereby improving comfort. The rodless band cylinder of the V-shaped engine is arranged at an angle to each other, which can also offset some vibrations. The disadvantage is that two rodless cylinder price covers must be used, and the structure is more complicated.
All rodless cylinder types of the horizontally opposed engine are arranged horizontally, just like boxers fighting. Since two adjacent rodless electric cylinder are horizontally opposed, this engine can easily offset each other's vibrations, making the engine run more smoothly. The horizontally opposed engine has a low center of gravity, which allows the front of the car to be designed to be flat and low. Both of these points enhance the driving stability of the car.
The power output shaft direction of the horizontally opposed engine is consistent with the transmission shaft direction, so there is no need to change the power transmission direction, but it can be directly connected to the clutch and transmission, which greatly improves the power transmission efficiency and makes the car start and accelerate more quickly. The disadvantage is that it is inconvenient to repair, and ordinary cars are rarely equipped with it. Now only Porsche, Subaru and Toyota are still producing and using this engine.
