How To Solve The Problem Of Rodless Cylinder Damage
Publish Time: Author: Site Editor Visit: 1
Rodless Cylinder Due to different working environments and working hours in daily use, once a rodless cylinder is damaged, the location of the damage is also different. Here we will introduce the solutions to these problems:
(1) If the piston rod or cylinder head in the rodless cylinder is broken, it is usually due to improper installation of the piston rod in the rodless cylinder or it may be caused by the ineffectiveness of the buffer. Then our engineers will deal with it by properly adjusting the middle position of the piston rod; replacing the seal ring in the buffer or adjusting the screw, which can basically solve the problem.
(2) The rodless cylinder used by the engineer has poor buffering effect, then usually the buffer seal ring is worn, which is basically caused by the damage of the adjustment screw; the solution is to replace the seal ring and the adjustment screw to solve this problem.
(3) When the rodless cylinder on the machine has internal and external leakage problems, it is usually caused by the deviation of the piston rod installation, insufficient lubricating oil supply in the cylinder, wear or damage of the seal ring and the sealing ring, and it is more likely that there are impurities in the rodless cylinder. Therefore, when the rodless cylinder leaks inside or outside, we first re-adjust the center of the piston rod to ensure the coaxiality of the piston rod and the cylinder; it is necessary to frequently check whether the oil mist device is working normally to ensure the smoothness of the rodless cylinder; and if the seal ring and sealing ring are worn or damaged, the engineer must replace them in time; if there are impurities in the rodless cylinder, it is necessary to remove the impurities in time to ensure the normal operation of the rodless cylinder.
