A Million-dollar Mechanic Teaches You How To Maintain The Cylinder
Publish Time: Author: Site Editor Visit: 14
Secondly, it is necessary to perform regular maintenance on rodless cylinder types. If it is not properly maintained, it will not only fail to extend the service life of rodless electric cylinder, but will even shorten the service life of rodless guided cylinder.
(1) When using rodless piston, be careful not to exceed the maximum operating pressure. Facts have proved that frequently operating rodless pneumatic cylinder price in an environment that exceeds the operating pressure will greatly reduce the service life of the pneumatic components themselves.
(2) Always ensure the condition of spare parts. Loose parts may cause very serious dangers. If worn parts need to be replaced, special parts should be used, and air compressor pipes should not be damaged or hit.
(3) In order to ensure the service life of pneumatic components, it is recommended that users should lubricate them before and after using pneumatic components. Among them, the impact frame group needs to be lubricated and maintained once a week.
(4) Water vapor will condense in compressed air, which is easy to cause rust. If there is no proper lubrication, the service life of pneumatic components will be greatly shortened. Therefore, the agent of Jiurong pneumatic components reminds users that they need to do a comprehensive maintenance of pneumatic components in order to truly extend their service life.
(5) To prevent the end cover from being directly hit by the piston, small rodless cylinder needs an additional buffer device.
Generally speaking, the current stainless steel rodless cylinder generally comes with an air buffer of about 10mm. This is to avoid: when ultraline rodless cylinder is working, due to the thrust of air pressure, the inevitable inertial movement of the piston when it moves back and forth cannot be stopped in time. Then the end cover is protected by air buffer to prevent the end cover from being directly hit by the piston. Usually many people think that washdown rodless cylinder itself has an air buffer, so there is no need for an additional buffer device, which is more cost-effective. In fact, this idea is wrong. The air buffer of the cylinder mainly relies on gas. The power of the buffer is relatively small. When the workpiece is loaded and the cylinder runs very fast, the role of the air buffer is limited and cannot play a protective role, which may cause the cylinder to be damaged and reduce its service life. At this time, it is necessary to install an oil pressure buffer to protect the mechanical equipment. Otherwise, the cost caused by the damage to the cylinder will greatly increase the cost. Air cushioning occurs inside the cylinder, while the workpiece runs outside. Therefore, when the workpiece contacts the cross-section of the mechanical equipment, impact noise is inevitable. At this time, air cushioning has no effect on this external noise. Therefore, external oil pressure buffers should be installed to reduce noise and protect equipment, thereby improving the company's production efficiency and saving costs.】
